I clicked to install wireguard and the plinth interfaces gives me this error message:
Error installing application: ‘gi.repository.NM’ object has no attribute 'SETTING_WIREGUARD_SETTING_NAME’
Can you recommend how to fix?
Thanks!
IIUC, if you have fully upgraded to Bullseye, you shoudn’t see this error. What is version of network-manager? RUn
dpkg -l network-manager
Thanks, Sunil. Here is output for # dpkg -l network-manager
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-===============-================-============-=============================>
ii network-manager 1.14.6-2+deb10u1 armhf network management framework >
The version of network-manager you have is from Debian 10 (Buster) instead of Debian 11 (Bullseye). Please try to run manual update from System → Updates.
Sunil, I ran System->Updates and then tried installing wireguard again, but same error. The output of dpkg -l network-manager is also the same as above.
I had difficulty with this upgrade, and did it manually. E.g., I made the changes to sources.list recommended here
Here is the installation log from my latest System->Updates:
Log started: 2021-10-08 15:38:40
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69182 files and directories currently installed.)
Removing libboost-regex1.67.0:armhf (1.67.0-13+deb10u1) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log started: 2021-10-08 17:25:52
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69177 files and directories currently installed.)
Removing libdns1104:armhf (1:9.11.5.P4+dfsg-5.1+deb10u5) ...
Removing libisc1100:armhf (1:9.11.5.P4+dfsg-5.1+deb10u5) ...
Removing libgeoip1:armhf (1.6.12-7) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:27:07
Log started: 2021-10-08 17:27:11
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69152 files and directories currently installed.)
Removing libcroco3:armhf (0.6.12-3) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:28:14
Log started: 2021-10-08 17:28:19
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69143 files and directories currently installed.)
Removing nodejs (10.24.0~dfsg-1~deb10u1) ...
Removing libnode64:armhf (10.24.0~dfsg-1~deb10u1) ...
Removing libc-ares2:armhf (1.17.1-1+deb11u1) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:29:37
Log started: 2021-10-08 17:29:42
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 69119 files and directories currently installed.)
Removing libperl5.28:armhf (5.28.1-6+deb10u1) ...
Removing perl-modules-5.28 (5.28.1-6+deb10u1) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:31:20
Log started: 2021-10-08 17:31:23
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67252 files and directories currently installed.)
Removing libevent-2.1-6:armhf (2.1.8-stable-4) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:33:04
Log started: 2021-10-08 17:33:07
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67246 files and directories currently installed.)
Removing libpgm-5.2-0:armhf (5.2.122~dfsg-3) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:35:03
Log started: 2021-10-08 17:35:06
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67241 files and directories currently installed.)
Removing libboost-iostreams1.67.0:armhf (1.67.0-13+deb10u1) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:36:22
Log started: 2021-10-08 17:36:26
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67236 files and directories currently installed.)
Removing erlang-p1-iconv (1.0.12-3) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:36:55
Log started: 2021-10-08 17:36:59
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67222 files and directories currently installed.)
Removing libgd3:armhf (2.3.0-2) ...
Removing libfontconfig1:armhf (2.13.1-4.2) ...
Processing triggers for libc-bin (2.31-13) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:37:38
Log started: 2021-10-08 17:37:42
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67209 files and directories currently installed.)
Removing geoip-database (20191224-3) ...
quota not working (qgroup not set)
Log ended: 2021-10-08 17:38:15
Log started: 2021-10-08 17:38:19
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67203 files and directories currently installed.)
Removing libnftables0:armhf (0.9.0-2) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:38:57
Log started: 2021-10-08 17:39:04
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67198 files and directories currently installed.)
Removing libmatheval1:armhf (1.1.11+dfsg-4) ...
Removing libfl2:armhf (2.6.4-8) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:39:36
Log started: 2021-10-08 17:39:40
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67184 files and directories currently installed.)
Removing libisccc161:armhf (1:9.11.19+dfsg-2.1) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:40:10
Log started: 2021-10-08 17:40:14
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67178 files and directories currently installed.)
Removing python3-mock (4.0.3-1) ...
Config is in use.
Log ended: 2021-10-08 17:40:34
Log started: 2021-10-08 17:40:38
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67165 files and directories currently installed.)
Removing libipset11:armhf (6.38-1.2) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:41:08
Log started: 2021-10-08 17:41:12
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67158 files and directories currently installed.)
Removing liblua5.2-0:armhf (5.2.4-1.1+b3) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:41:35
Log started: 2021-10-08 17:41:40
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67150 files and directories currently installed.)
Removing python3-pbr (5.5.0-2) ...
update-alternatives: warning: alternative /usr/bin/python3-pbr (part of link group pbr) doesn't exist; removing from list of alternatives
update-alternatives: warning: /etc/alternatives/pbr is dangling; it will be updated with best choice
Config is in use.
Log ended: 2021-10-08 17:42:17
Log started: 2021-10-08 17:42:21
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67101 files and directories currently installed.)
Removing bsdmainutils (12.1.7+nmu3) ...
Config is in use.
Log ended: 2021-10-08 17:42:43
Log started: 2021-10-08 17:42:48
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67097 files and directories currently installed.)
Removing libatomic1:armhf (10.2.1-6) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:43:32
Log started: 2021-10-08 17:43:37
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67094 files and directories currently installed.)
Removing libjim0.77:armhf (0.77+dfsg0-3) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:44:06
Log started: 2021-10-08 17:44:11
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67090 files and directories currently installed.)
Removing libhavege1:armhf (1.9.1-7) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:44:38
Log started: 2021-10-08 17:44:42
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67084 files and directories currently installed.)
Removing liblwres161:armhf (1:9.11.19+dfsg-2.1) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:45:08
Log started: 2021-10-08 17:45:12
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67078 files and directories currently installed.)
Removing python3-asn1crypto (1.4.0-1) ...
Config is in use.
Log ended: 2021-10-08 17:45:39
Log started: 2021-10-08 17:45:43
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67045 files and directories currently installed.)
Removing python-apt (1.8.4.3) ...
Config is in use.
Log ended: 2021-10-08 17:46:05
Log started: 2021-10-08 17:46:09
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67016 files and directories currently installed.)
Removing libpython3.7:armhf (3.7.3-2+deb10u3) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:46:36
Log started: 2021-10-08 17:46:39
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 67009 files and directories currently installed.)
Removing fontconfig-config (2.13.1-4.2) ...
Config is in use.
Log ended: 2021-10-08 17:47:06
Log started: 2021-10-08 17:47:10
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 66947 files and directories currently installed.)
Removing libisc1105:armhf (1:9.11.19+dfsg-2.1) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:47:31
Log started: 2021-10-08 17:47:35
Config is in use.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 66941 files and directories currently installed.)
Removing libxpm4:armhf (1:3.5.12-1) ...
Processing triggers for libc-bin (2.31-13) ...
Config is in use.
Log ended: 2021-10-08 17:48:02
Log started: 2021-10-08 17:48:07
quota not working (qgroup not set)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 66935 files and directories currently installed.)
Removing nodejs-doc (12.22.5~dfsg-2~11u1) ...
Removing libjs-highlight.js (9.18.5+dfsg1-1) ...
Processing triggers for doc-base (0.11.1) ...
Processing 1 removed doc-base file...
Config is in use.
Log ended: 2021-10-08 17:48:49
Looks like a bunch of obsolete packages got removed but none were upgraded. Is your sources.list exactly like in that link? If not, could you please post yours?
Try:
apt install unattended-upgrades
Then try upgrade again.
Also run:
apt policy network-manager
and
apt dist-upgrade --dry-run
I double-checked the /etc/apt/sources.list file and it has the same lines as the linked example.
I ran apt install unattended-upgrades but afterwards, plinth doesn’t come back up and I get a " Service Unavailable" message on freedombox.local. I am still able to connect via SSH.
I then rebooted from the command line, but am still getting " Service Unavailable." However, I still have SSH available.
Without yet being able to run Plinth->System->Upgrade, I ran the commands suggested above. First,
apt policy network-manager
network-manager:
Installed: 1.14.6-2+deb10u1
Candidate: 1.30.0-2
Version table:
1.30.0-2 500
500 http://deb.debian.org/debian bullseye/main armhf Packages
*** 1.14.6-2+deb10u1 100
100 /var/lib/dpkg/status
and then, second, as follows. Do you recommend I run apt autoremove as given in the output from apt dist-upgrade --dry-run?
apt dist-upgrade --dry-run
NOTE: This is only a simulation!
apt needs root privileges for real execution.
Keep also in mind that locking is deactivated,
so don't depend on the relevance to the real current situation!
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
alsa-topology-conf alsa-ucm-conf apache2 apache2-bin apache2-data apache2-utils augeas-lenses augeas-tools avahi-daemon avahi-utils
batctl bind9-dnsutils bind9-host bind9-libs borgbackup bridge-utils certbot cockpit cockpit-bridge cockpit-networkmanager
cockpit-packagekit cockpit-storaged cockpit-system cockpit-ws cracklib-runtime crda curl dconf-gsettings-backend dconf-service debsecan
distro-info-data dnsmasq-base dnsutils eject exfat-fuse exfat-utils ez-ipupdate fail2ban firmware-ath9k-htc flite fonts-fork-awesome
fonts-lato gdisk gettext gettext-base gir1.2-udisks-2.0 glib-networking glib-networking-common glib-networking-services groff-base
gsettings-desktop-schemas haveged htop iftop iso-codes iw javascript-common ldap-utils ldapscripts libapache2-mod-auth-pubtkt libapr1
libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libasound2 libasound2-data libatasmart4 libaugeas0 libavahi-core7 libb2-1
libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2 libblockdev-mdraid2 libblockdev-part-err2 libblockdev-part2 libblockdev-swap2
libblockdev-utils2 libblockdev2 libbluetooth3 libboost-atomic1.67.0 libboost-system1.67.0 libboost-thread1.67.0 libbtrfs0
libbytesize-common libbytesize1 libcbor0 libcrack2 libcurl4 libdaemon0 libdconf1 libdeflate0 libdw1 libfido2-1 libflite1 libfreetype6
libfstrm0 libfuse2 libglib2.0-bin libgomp1 libgstreamer1.0-0 libgudev-1.0-0 libhavege2 libicu63 libimagequant0 libintl-perl
libintl-xs-perl libiw30 libjbig0 libjim0.79 libjpeg62-turbo libjs-bootstrap4 libjs-jquery libjs-modernizr libjs-popper.js libjs-sizzle
libjs-sphinxdoc libjs-underscore libjson-glib-1.0-0 libjson-glib-1.0-common libkyotocabinet16v5 liblcms2-2 liblua5.3-0 libmaxminddb0
libmbim-glib4 libmbim-proxy libmm-glib0 libmodule-find-perl libmodule-scandeps-perl libmpdec2 libmpfr6 libndp0 libnl-genl-3-200 libnorm1
libnss-gw-name libnss-ldapd libnss-mdns libnss-myhostname libntfs-3g883 libpackagekit-glib2-18 libpam-abl libpam-ldapd libpam-tmpdir
libparted-fs-resize0 libpci3 libpcsclite1 libpgm-5.3-0 libpng16-16 libproc-processtable-perl libprotobuf-c1 libproxy1v5
libpwquality-common libpwquality-tools libpwquality1 libpython2-stdlib libpython2.7 libpython2.7-minimal libpython2.7-stdlib
libpython3.7-minimal libpython3.7-stdlib libqmi-glib5 libqmi-proxy libreadline7 libsnapper5 libsodium23 libsort-naturally-perl libssh-4
libteamdctl0 libterm-readkey-perl libtiff5 libuchardet0 libudisks2-0 libunwind8 libusb-1.0-0 libuv1 libvolume-key1 libwebp6
libwebpdemux2 libwebpmux3 libwrap0 libx11-6 libx11-data libxau6 libxcb1 libxdmcp6 libxext6 libxmuu1 libzmq5 locales-all lsb-release lsof
mdadm modemmanager ncurses-term needrestart netcat-openbsd network-manager node-jquery nscd nslcd nslcd-utils ntfs-3g openssh-client
openssh-server openssh-sftp-server packagekit packagekit-tools pci.ids pciutils php-common php-fpm php7.4-cli php7.4-common php7.4-fpm
php7.4-json php7.4-opcache php7.4-readline pppoe pwgen python-apt-common python2 python2-minimal python2.7 python2.7-minimal
python3-acme python3-apt python3-argon2 python3-augeas python3-bcrypt python3-bootstrapform python3-certbot python3-cherrypy3
python3-configargparse python3-configobj python3-distro python3-distro-info python3-django python3-django-appconf python3-django-axes
python3-django-captcha python3-django-ipware python3-django-ranged-response python3-django-stronghold python3-future python3-icu
python3-josepy python3-llfuse python3-markupsafe python3-msgpack python3-nacl python3-olefile python3-pampy python3-paramiko
python3-parsedatetime python3-pil python3-psutil python3-pyinotify python3-repoze.lru python3-rfc3339 python3-routes python3-ruamel.yaml
python3-ruamel.yaml.clib python3-simplejson python3-sqlparse python3-systemd python3-tz python3-webob python3-zope.component
python3-zope.event python3-zope.hookable python3-zope.interface python3.7 python3.7-minimal rfkill sharutils slapd snapper sshfs
ssl-cert sudo tcpdump udisks2 unattended-upgrades usb-modeswitch usb-modeswitch-data uwsgi uwsgi-core uwsgi-plugin-python3 wamerican
wget whois wireless-regdb wireless-tools wpasupplicant xauth zile
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
cockpit-dashboard libgc1c2 libldb1 libmailutils5 libpolkit-backend-1-0 libpython-stdlib libsnapper4 php7.3-cli php7.3-common php7.3-fpm
php7.3-json php7.3-opcache php7.3-readline python python-crypto python-django-common python-dnspython python-gpg python-ldb
python-minimal python-pyicu python-samba python-talloc python-tdb
The following NEW packages will be installed:
libdw1 libgc1 libldb2 libmailutils7 libsnapper5 libunwind8 liburing1 python3-dnspython python3-gpg python3-icu python3-ldb
python3-markdown python3-pygments python3-samba python3-talloc python3-tdb python3-yaml
The following packages will be upgraded:
apache2 apache2-bin apache2-data apache2-utils appstream cockpit cockpit-bridge cockpit-networkmanager cockpit-packagekit
cockpit-storaged cockpit-system cockpit-ws gir1.2-glib-2.0 gir1.2-nm-1.0 glib-networking glib-networking-services guile-2.2-libs
libappstream4 libgstreamer1.0-0 libnm0 libpolkit-agent-1-0 libpolkit-gobject-1-0 libpython2-stdlib libpython2.7 libpython2.7-minimal
libpython2.7-stdlib libtdb1 libwbclient0 mailutils mailutils-common network-manager php-common policykit-1 ppp python2 python2-minimal
python2.7 python2.7-minimal python3-django python3-parsedatetime python3-six samba samba-common samba-common-bin samba-dsdb-modules
samba-libs samba-vfs-modules snapper zile
49 upgraded, 17 newly installed, 24 to remove and 0 not upgraded.
Remv cockpit-dashboard [188-1]
Inst mailutils [1:3.5-4] (1:3.10-3+b1 Debian:11.0/stable [armhf]) []
Remv libmailutils5 [1:3.5-4] []
Inst mailutils-common [1:3.5-4] (1:3.10-3 Debian:11.0/stable [all]) []
Inst zile [2.4.14-7+b1] (2.4.15-2 Debian:11.0/stable [armhf]) []
Inst guile-2.2-libs [2.2.4+1-2+deb10u1] (2.2.7+1-6 Debian:11.0/stable [armhf]) []
Remv libgc1c2 [1:7.6.4-0.4] []
Inst libgc1 (1:8.0.4-3 Debian:11.0/stable [armhf]) []
Inst libmailutils7 (1:3.10-3+b1 Debian:11.0/stable [armhf])
Inst python3-dnspython (2.0.0-1 Debian:11.0/stable [all])
Inst samba-dsdb-modules [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Inst samba-vfs-modules [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Inst samba [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Inst samba-common-bin [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Remv python-samba [2:4.9.5+dfsg-5+deb10u1] []
Inst samba-libs [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Remv python-ldb [2:1.5.1+really1.4.6-3+deb10u1] []
Remv libldb1 [2:1.5.1+really1.4.6-3+deb10u1] []
Inst libldb2 (2:2.2.0-3.1 Debian:11.0/stable [armhf]) []
Inst python3-ldb (2:2.2.0-3.1 Debian:11.0/stable [armhf]) []
Inst python3-tdb (1.4.3-1+b1 Debian:11.0/stable [armhf]) []
Inst libwbclient0 [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Inst python3-talloc (2.3.1-2+b1 Debian:11.0/stable [armhf]) []
Inst python3-samba (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf]) []
Inst samba-common [2:4.9.5+dfsg-5+deb10u1] (2:4.13.5+dfsg-2 Debian:11.0/stable [all]) []
Remv python-tdb [1.3.16-2+b1] []
Inst libtdb1 [1.3.16-2+b1] (1.4.3-1+b1 Debian:11.0/stable [armhf]) []
Inst liburing1 (0.7-3 Debian:11.0/stable [armhf])
Inst policykit-1 [0.105-25] (0.105-31 Debian:11.0/stable [armhf]) []
Inst libpolkit-agent-1-0 [0.105-25] (0.105-31 Debian:11.0/stable [armhf]) []
Remv libpolkit-backend-1-0 [0.105-25] []
Inst libpolkit-gobject-1-0 [0.105-25] (0.105-31 Debian:11.0/stable [armhf])
Remv python-talloc [2.1.14-2]
Remv python-crypto [2.6.1-9+b1]
Remv python-pyicu [2.2-2]
Remv python-gpg [1.12.0-6]
Remv python [2.7.16-1] [python-dnspython:armhf ]
Remv libpython-stdlib [2.7.16-1] [python-dnspython:armhf ]
Inst snapper [0.8.2-1] (0.8.15-1 Debian:11.0/stable [armhf]) [python-dnspython:armhf ]
Remv libsnapper4 [0.8.2-1] [python-dnspython:armhf ]
Inst libsnapper5 (0.8.15-1 Debian:11.0/stable [armhf]) [python-dnspython:armhf ]
Remv php7.3-fpm [7.3.29-1~deb10u1] [python-dnspython:armhf ]
Remv php7.3-cli [7.3.29-1~deb10u1] [python-dnspython:armhf ]
Remv php7.3-readline [7.3.29-1~deb10u1] [python-dnspython:armhf ]
Remv php7.3-opcache [7.3.29-1~deb10u1] [python-dnspython:armhf ]
Remv php7.3-common [7.3.29-1~deb10u1] [php7.3-json:armhf python-dnspython:armhf ]
Remv php7.3-json [7.3.29-1~deb10u1] [python-dnspython:armhf ]
Remv python-django-common [1:1.11.29-1~deb10u1] [python-dnspython:armhf python3-django:armhf ]
Inst python3-django [1:1.11.29-1~deb10u1] (2:2.2.24-1 Debian:11.0/stable [all]) [python-dnspython:armhf ]
Remv python-dnspython [1.16.0-1+deb10u1]
Remv python-minimal [2.7.16-1]
Inst apache2 [2.4.48-3.1+deb11u1] (2.4.51-1~deb11u1 Debian-Security:11/stable-security [armhf]) []
Inst apache2-bin [2.4.48-3.1+deb11u1] (2.4.51-1~deb11u1 Debian-Security:11/stable-security [armhf]) []
Inst apache2-data [2.4.48-3.1+deb11u1] (2.4.51-1~deb11u1 Debian-Security:11/stable-security [all]) []
Inst apache2-utils [2.4.48-3.1+deb11u1] (2.4.51-1~deb11u1 Debian-Security:11/stable-security [armhf])
Inst python2.7 [2.7.16-2+deb10u1] (2.7.18-8 Debian:11.0/stable [armhf]) []
Inst libpython2.7 [2.7.16-2+deb10u1] (2.7.18-8 Debian:11.0/stable [armhf]) []
Inst libpython2.7-stdlib [2.7.16-2+deb10u1] (2.7.18-8 Debian:11.0/stable [armhf]) []
Inst python2.7-minimal [2.7.16-2+deb10u1] (2.7.18-8 Debian:11.0/stable [armhf]) []
Inst libpython2.7-minimal [2.7.16-2+deb10u1] (2.7.18-8 Debian:11.0/stable [armhf])
Inst python2-minimal [2.7.16-1] (2.7.18-3 Debian:11.0/stable [armhf]) [python2:armhf on python2-minimal:armhf] [python2:armhf ]
Conf libpython2.7-minimal (2.7.18-8 Debian:11.0/stable [armhf]) [python2:armhf ]
Conf python2.7-minimal (2.7.18-8 Debian:11.0/stable [armhf]) [python2:armhf ]
Conf python2-minimal (2.7.18-3 Debian:11.0/stable [armhf]) [python2:armhf ]
Inst python2 [2.7.16-1] (2.7.18-3 Debian:11.0/stable [armhf]) []
Inst libpython2-stdlib [2.7.16-1] (2.7.18-3 Debian:11.0/stable [armhf])
Inst libappstream4 [0.12.5-1] (0.14.4-1 Debian:11.0/stable [armhf])
Inst appstream [0.12.5-1] (0.14.4-1 Debian:11.0/stable [armhf])
Inst ppp [2.4.7-2+4.1+deb10u1] (2.4.9-1+1 Debian:11.0/stable [armhf]) [network-manager:armhf on ppp:armhf] [network-manager:armhf ]
Inst network-manager [1.14.6-2+deb10u1] (1.30.0-2 Debian:11.0/stable [armhf]) []
Inst libnm0 [1.14.6-2+deb10u1] (1.30.0-2 Debian:11.0/stable [armhf])
Inst cockpit-networkmanager [188-1] (239-1 Debian:11.0/stable [all]) []
Inst cockpit-storaged [188-1] (239-1 Debian:11.0/stable [all]) []
Inst cockpit-system [188-1] (239-1 Debian:11.0/stable [all]) []
Inst glib-networking [2.58.0-2+deb10u2] (2.66.0-2 Debian:11.0/stable [armhf]) []
Inst glib-networking-services [2.58.0-2+deb10u2] (2.66.0-2 Debian:11.0/stable [armhf]) []
Inst cockpit-bridge [188-1] (239-1 Debian:11.0/stable [armhf])
Inst cockpit-ws [188-1] (239-1 Debian:11.0/stable [armhf])
Inst cockpit [188-1] (239-1 Debian:11.0/stable [all])
Inst cockpit-packagekit [188-1] (239-1 Debian:11.0/stable [all])
Inst gir1.2-glib-2.0 [1.58.3-2] (1.66.1-1+b1 Debian:11.0/stable [armhf])
Inst gir1.2-nm-1.0 [1.14.6-2+deb10u1] (1.30.0-2 Debian:11.0/stable [armhf])
Inst libdw1 (0.183-1 Debian:11.0/stable [armhf])
Inst libunwind8 (1.3.2-2 Debian:11.0/stable [armhf])
Inst libgstreamer1.0-0 [1.14.4-1] (1.18.4-2.1 Debian:11.0/stable [armhf])
Inst php-common [2:69] (2:76 Debian:11.0/stable [all])
Inst python3-gpg (1.14.0-1+b2 Debian:11.0/stable [armhf])
Inst python3-icu (2.5-1+b2 Debian:11.0/stable [armhf])
Inst python3-markdown (3.3.4-1 Debian:11.0/stable [all])
Inst python3-parsedatetime [2.4-2] (2.6-1 Debian:11.0/stable [all])
Inst python3-pygments (2.7.1+dfsg-2.1 Debian:11.0/stable [all])
Inst python3-six [1.12.0-1] (1.16.0-2 Debian:11.0/stable [all])
Inst python3-yaml (5.3.1-5 Debian:11.0/stable [armhf])
Conf mailutils (1:3.10-3+b1 Debian:11.0/stable [armhf])
Conf mailutils-common (1:3.10-3 Debian:11.0/stable [all])
Conf zile (2.4.15-2 Debian:11.0/stable [armhf])
Conf guile-2.2-libs (2.2.7+1-6 Debian:11.0/stable [armhf])
Conf libgc1 (1:8.0.4-3 Debian:11.0/stable [armhf])
Conf libmailutils7 (1:3.10-3+b1 Debian:11.0/stable [armhf])
Conf python3-dnspython (2.0.0-1 Debian:11.0/stable [all])
Conf samba-dsdb-modules (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf samba-vfs-modules (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf samba (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf samba-common-bin (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf samba-libs (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf libldb2 (2:2.2.0-3.1 Debian:11.0/stable [armhf])
Conf python3-ldb (2:2.2.0-3.1 Debian:11.0/stable [armhf])
Conf python3-tdb (1.4.3-1+b1 Debian:11.0/stable [armhf])
Conf libwbclient0 (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf python3-talloc (2.3.1-2+b1 Debian:11.0/stable [armhf])
Conf python3-samba (2:4.13.5+dfsg-2 Debian:11.0/stable [armhf])
Conf samba-common (2:4.13.5+dfsg-2 Debian:11.0/stable [all])
Conf libtdb1 (1.4.3-1+b1 Debian:11.0/stable [armhf])
Conf liburing1 (0.7-3 Debian:11.0/stable [armhf])
Conf policykit-1 (0.105-31 Debian:11.0/stable [armhf])
Conf libpolkit-agent-1-0 (0.105-31 Debian:11.0/stable [armhf])
Conf libpolkit-gobject-1-0 (0.105-31 Debian:11.0/stable [armhf])
Conf snapper (0.8.15-1 Debian:11.0/stable [armhf])
Conf libsnapper5 (0.8.15-1 Debian:11.0/stable [armhf])
Conf python3-django (2:2.2.24-1 Debian:11.0/stable [all])
Conf apache2 (2.4.51-1~deb11u1 Debian-Security:11/stable-security [armhf])
Conf apache2-bin (2.4.51-1~deb11u1 Debian-Security:11/stable-security [armhf])
Conf apache2-data (2.4.51-1~deb11u1 Debian-Security:11/stable-security [all])
Conf apache2-utils (2.4.51-1~deb11u1 Debian-Security:11/stable-security [armhf])
Conf python2.7 (2.7.18-8 Debian:11.0/stable [armhf])
Conf libpython2.7 (2.7.18-8 Debian:11.0/stable [armhf])
Conf libpython2.7-stdlib (2.7.18-8 Debian:11.0/stable [armhf])
Conf python2 (2.7.18-3 Debian:11.0/stable [armhf])
Conf libpython2-stdlib (2.7.18-3 Debian:11.0/stable [armhf])
Conf libappstream4 (0.14.4-1 Debian:11.0/stable [armhf])
Conf appstream (0.14.4-1 Debian:11.0/stable [armhf])
Conf ppp (2.4.9-1+1 Debian:11.0/stable [armhf])
Conf network-manager (1.30.0-2 Debian:11.0/stable [armhf])
Conf libnm0 (1.30.0-2 Debian:11.0/stable [armhf])
Conf cockpit-networkmanager (239-1 Debian:11.0/stable [all])
Conf cockpit-storaged (239-1 Debian:11.0/stable [all])
Conf cockpit-system (239-1 Debian:11.0/stable [all])
Conf glib-networking (2.66.0-2 Debian:11.0/stable [armhf])
Conf glib-networking-services (2.66.0-2 Debian:11.0/stable [armhf])
Conf cockpit-bridge (239-1 Debian:11.0/stable [armhf])
Conf cockpit-ws (239-1 Debian:11.0/stable [armhf])
Conf cockpit (239-1 Debian:11.0/stable [all])
Conf cockpit-packagekit (239-1 Debian:11.0/stable [all])
Conf gir1.2-glib-2.0 (1.66.1-1+b1 Debian:11.0/stable [armhf])
Conf gir1.2-nm-1.0 (1.30.0-2 Debian:11.0/stable [armhf])
Conf libdw1 (0.183-1 Debian:11.0/stable [armhf])
Conf libunwind8 (1.3.2-2 Debian:11.0/stable [armhf])
Conf libgstreamer1.0-0 (1.18.4-2.1 Debian:11.0/stable [armhf])
Conf php-common (2:76 Debian:11.0/stable [all])
Conf python3-gpg (1.14.0-1+b2 Debian:11.0/stable [armhf])
Conf python3-icu (2.5-1+b2 Debian:11.0/stable [armhf])
Conf python3-markdown (3.3.4-1 Debian:11.0/stable [all])
Conf python3-parsedatetime (2.6-1 Debian:11.0/stable [all])
Conf python3-pygments (2.7.1+dfsg-2.1 Debian:11.0/stable [all])
Conf python3-six (1.16.0-2 Debian:11.0/stable [all])
Conf python3-yaml (5.3.1-5 Debian:11.0/stable [armhf])
Without yet being able to run Plinth->System->Upgrade, I ran the commands suggested above. First,
Somehow, the upgrade process didn’t complete yet. Looking at the list of packages that need to upgraded, I think it is safe if you manually run the upgrade process using apt. Run the following:
apt dist-upgrade
I then rebooted from the command line, but am still getting " Service Unavailable." However, I still have SSH available.
If after a dist-upgrade and a reboot. If things don’t resolve themselves, then collect the logs for why Plinth service is not starting:
journalctl -u plinth
We should be able to fix the problem using the logs.
I ran apt dist-upgrade (which seemed to complete normally) and then rebooted. Freedombox restarts and I know, for example, that Privoxy is running. Looks like syncthing is also up as is SSH.
However, still no response from plinth; still getting 503 Service Unavailable.
I ran journalctl -u plinth and here’s the tail end of the log:
--- Boot e5dfbe7dd3394b338a23eea6779b6b7e --
Oct 08 21:44:52 freedombox systemd[1]: Started FreedomBox Service (Plinth).
Oct 08 21:45:32 freedombox /usr/bin/plinth[484]: AXES: BEGIN LOG
Oct 08 21:45:32 freedombox /usr/bin/plinth[484]: AXES: Using django-axes version 5.4.3
Oct 08 21:45:32 freedombox /usr/bin/plinth[484]: AXES: blocking by IP only.
Oct 08 21:45:33 freedombox /usr/bin/plinth[484]: FreedomBox Service (Plinth) version - 21.4.4
Oct 08 21:45:33 freedombox /usr/bin/plinth[484]: Script prefix - /plinth
Oct 08 21:45:35 freedombox /usr/bin/plinth[484]: Initializing apps - apache, names, avahi, storage, backups, cockpit, firewall, config, datetime, diagnostics, dynamicdns, first_boot, help, letsencrypt, networks, power, security, snapshot, ssh, sso, upgrades, users, api, bepasty, bind, calibre, coturn, deluge, ejabberd, gitweb, i2p, ikiwiki, infinoted, jsxc, matrixsynapse, mediawiki, minetest, minidlna, mldonkey, monkeysphere, mumble, openvpn, pagekite, performance, privoxy, quassel, radicale, roundcube, samba, searx, shadowsocks, sharing, syncthing, tor, transmission, ttrss, wireguard, zoph
Oct 08 21:45:36 freedombox /usr/bin/plinth[484]: Added domain freedombox.local of type domain-type-local with services __all__
Oct 08 21:45:37 freedombox /usr/bin/plinth[484]: Added domain syncpoint.sds-ip.de of type domain-type-static with services __all__
Oct 08 21:45:38 freedombox /usr/bin/plinth[484]: # dynamicdns status
Oct 08 21:45:38 freedombox sudo[1293]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/dynamicdns status
Oct 08 21:45:38 freedombox sudo[1293]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:45:39 freedombox sudo[1293]: pam_unix(sudo:session): session closed for user root
Oct 08 21:45:39 freedombox /usr/bin/plinth[484]: Added domain syncpoint.sds-ip.de of type domain-type-dynamic with services __all__
Oct 08 21:45:39 freedombox /usr/bin/plinth[484]: # dynamicdns status
Oct 08 21:45:39 freedombox sudo[1334]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/dynamicdns status
Oct 08 21:45:39 freedombox sudo[1334]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:45:39 freedombox sudo[1334]: pam_unix(sudo:session): session closed for user root
Oct 08 21:45:40 freedombox /usr/bin/plinth[484]: $ ikiwiki get-sites
Oct 08 21:45:42 freedombox /usr/bin/plinth[484]: Checking if any Let's Encrypt certificates got renewed.
Oct 08 21:45:42 freedombox /usr/bin/plinth[484]: # letsencrypt get-status
Oct 08 21:45:43 freedombox sudo[1397]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/letsencrypt get-status
Oct 08 21:45:43 freedombox sudo[1397]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:45:54 freedombox sudo[1397]: pam_unix(sudo:session): session closed for user root
Oct 08 21:45:54 freedombox /usr/bin/plinth[484]: Certificate for syncpoint.sds-ip.de is already the latest known.
Oct 08 21:45:54 freedombox /usr/bin/plinth[484]: Running regular setup.
Oct 08 21:45:54 freedombox /usr/bin/plinth[484]: # packages is-package-manager-busy
Oct 08 21:45:54 freedombox /usr/bin/plinth[484]: Started new thread for glib main loop.
Oct 08 21:45:54 freedombox /usr/bin/plinth[484]: Setting up CherryPy server
Oct 08 21:45:54 freedombox /usr/bin/plinth[484]: Creating network manager client
Oct 08 21:45:55 freedombox sudo[1420]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/packages is-package-manager-busy
Oct 08 21:45:55 freedombox sudo[1420]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: D-Bus connection acquired: org.freedombox.Service
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: D-Bus name acquired: org.freedombox.Service
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: Created Network manager client
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Listening for SIGTERM.
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Listening for SIGHUP.
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Listening for SIGUSR1.
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Bus STARTING
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Started monitor thread '_TimeoutMonitor'.
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Serving on http://127.0.0.1:8000
Oct 08 21:45:55 freedombox /usr/bin/plinth[484]: [08/Oct/2021:21:45:55] ENGINE Bus STARTED
Oct 08 21:45:56 freedombox /usr/bin/plinth[484]: New filesystem found: by-uuid-325f972e-bb64-4f1c-94c6-b677f6bd5ed7 /dev/sda
Oct 08 21:45:56 freedombox /usr/bin/plinth[484]: Ignoring auto-mount on already mounted device: by-uuid-325f972e-bb64-4f1c-94c6-b677f6bd5ed7 /dev/sda
Oct 08 21:45:56 freedombox /usr/bin/plinth[484]: New filesystem found: by-uuid-b1142e7e-bec6-4434-8e1d-cfd44028d2d3 /dev/mmcblk0p1
Oct 08 21:45:56 freedombox /usr/bin/plinth[484]: Ignoring auto-mount on already mounted device: by-uuid-b1142e7e-bec6-4434-8e1d-cfd44028d2d3 /dev/mmcblk0p1
Oct 08 21:45:56 freedombox /usr/bin/plinth[484]: New filesystem found: by-uuid-0efefc91-94b3-4753-9d0b-88cf073d7a1d /dev/mmcblk0p2
Oct 08 21:45:56 freedombox /usr/bin/plinth[484]: Ignoring auto-mount on already mounted device: by-uuid-0efefc91-94b3-4753-9d0b-88cf073d7a1d /dev/mmcblk0p2
Oct 08 21:45:57 freedombox sudo[1420]: pam_unix(sudo:session): session closed for user root
Oct 08 21:45:57 freedombox /usr/bin/plinth[484]: Running setup for modules, essential - True, selected modules - None
Oct 08 21:45:57 freedombox /usr/bin/plinth[484]: Setup thread finished.
Oct 08 21:46:51 freedombox /usr/bin/plinth[484]: # users get-user-groups admintx
Oct 08 21:46:51 freedombox sudo[1478]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/users get-user-groups admintx
Oct 08 21:46:51 freedombox sudo[1478]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:46:53 freedombox ldapsearch[1519]: DIGEST-MD5 common mech free
Oct 08 21:46:53 freedombox ldapsearch[1525]: DIGEST-MD5 common mech free
Oct 08 21:46:53 freedombox ldapsearch[1535]: DIGEST-MD5 common mech free
Oct 08 21:46:53 freedombox ldapsearch[1545]: DIGEST-MD5 common mech free
Oct 08 21:46:54 freedombox ldapsearch[1567]: DIGEST-MD5 common mech free
Oct 08 21:46:54 freedombox sudo[1478]: pam_unix(sudo:session): session closed for user root
Oct 08 21:47:49 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:47:49 freedombox sudo[1642]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:47:50 freedombox sudo[1642]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:47:51 freedombox sudo[1642]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:00 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:00 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:00 freedombox sudo[2038]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:00 freedombox sudo[2038]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:01 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:01 freedombox sudo[2039]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:01 freedombox sudo[2039]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:01 freedombox sudo[2042]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:01 freedombox sudo[2042]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:02 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:03 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:03 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:03 freedombox sudo[2051]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:03 freedombox sudo[2051]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:03 freedombox sudo[2052]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:03 freedombox sudo[2053]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:03 freedombox sudo[2053]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:03 freedombox sudo[2052]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:03 freedombox sudo[2039]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:04 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:04 freedombox sudo[2060]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:04 freedombox sudo[2060]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:04 freedombox sudo[2038]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:05 freedombox sudo[2042]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:06 freedombox sudo[2051]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:06 freedombox sudo[2053]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:07 freedombox sudo[2052]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:07 freedombox sudo[2060]: pam_unix(sudo:session): session closed for user root
Oct 08 21:56:08 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:08 freedombox sudo[2063]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 21:56:08 freedombox sudo[2063]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 21:56:10 freedombox sudo[2063]: pam_unix(sudo:session): session closed for user root
Oct 08 22:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 08 22:45:36 freedombox sudo[3821]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 08 22:45:36 freedombox sudo[3821]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 22:45:38 freedombox sudo[3821]: pam_unix(sudo:session): session closed for user root
Oct 08 22:52:39 freedombox /usr/bin/plinth[484]: # users get-user-groups admintx
Oct 08 22:52:39 freedombox sudo[3944]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/users get-user-groups admintx
Oct 08 22:52:39 freedombox sudo[3944]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 22:52:41 freedombox ldapsearch[3989]: DIGEST-MD5 common mech free
Oct 08 22:52:41 freedombox ldapsearch[3994]: DIGEST-MD5 common mech free
Oct 08 22:52:41 freedombox ldapsearch[4004]: DIGEST-MD5 common mech free
Oct 08 22:52:41 freedombox ldapsearch[4014]: DIGEST-MD5 common mech free
Oct 08 22:52:41 freedombox ldapsearch[4030]: DIGEST-MD5 common mech free
Oct 08 22:52:42 freedombox sudo[3944]: pam_unix(sudo:session): session closed for user root
Oct 08 22:52:47 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 22:52:47 freedombox sudo[4037]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 22:52:47 freedombox sudo[4037]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 22:52:49 freedombox sudo[4037]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:32 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox sudo[4741]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox sudo[4741]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:33 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox sudo[4744]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox sudo[4744]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:33 freedombox sudo[4745]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox sudo[4745]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:33 freedombox sudo[4746]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:33 freedombox sudo[4746]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:36 freedombox sudo[4741]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:36 freedombox sudo[4744]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:36 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:36 freedombox sudo[4745]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:36 freedombox sudo[4746]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:36 freedombox sudo[4753]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:36 freedombox sudo[4753]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:36 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:36 freedombox /usr/bin/plinth[484]: # auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:36 freedombox sudo[4756]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:36 freedombox sudo[4756]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:37 freedombox sudo[4757]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/auth-pubtkt generate-ticket --uid admintx --private-key-file /etc/apache2/auth-pubtkt-keys/privkey.pem --tokens admin
Oct 08 23:23:37 freedombox sudo[4757]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:23:39 freedombox sudo[4753]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:39 freedombox sudo[4757]: pam_unix(sudo:session): session closed for user root
Oct 08 23:23:39 freedombox sudo[4756]: pam_unix(sudo:session): session closed for user root
Oct 08 23:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 08 23:45:36 freedombox sudo[5395]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 08 23:45:36 freedombox sudo[5395]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 08 23:45:38 freedombox sudo[5395]: pam_unix(sudo:session): session closed for user root
Oct 09 00:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 00:45:36 freedombox sudo[6836]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 00:45:36 freedombox sudo[6836]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 00:45:37 freedombox sudo[6836]: pam_unix(sudo:session): session closed for user root
Oct 09 01:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 01:45:36 freedombox sudo[8096]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 01:45:36 freedombox sudo[8096]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 01:45:37 freedombox sudo[8096]: pam_unix(sudo:session): session closed for user root
Oct 09 02:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 02:45:36 freedombox sudo[9353]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 02:45:36 freedombox sudo[9353]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 02:45:37 freedombox sudo[9353]: pam_unix(sudo:session): session closed for user root
Oct 09 03:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 03:45:36 freedombox sudo[10602]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 03:45:36 freedombox sudo[10602]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 03:45:37 freedombox sudo[10602]: pam_unix(sudo:session): session closed for user root
Oct 09 04:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 04:45:36 freedombox sudo[11911]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 04:45:36 freedombox sudo[11911]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 04:45:38 freedombox sudo[11911]: pam_unix(sudo:session): session closed for user root
Oct 09 05:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 05:45:36 freedombox sudo[13180]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 05:45:36 freedombox sudo[13180]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 05:45:38 freedombox sudo[13180]: pam_unix(sudo:session): session closed for user root
Oct 09 06:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 06:45:37 freedombox sudo[14623]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 06:45:37 freedombox sudo[14623]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 06:45:38 freedombox sudo[14623]: pam_unix(sudo:session): session closed for user root
Oct 09 07:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 07:45:37 freedombox sudo[15933]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 07:45:37 freedombox sudo[15933]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 07:45:38 freedombox sudo[15933]: pam_unix(sudo:session): session closed for user root
Oct 09 08:45:36 freedombox /usr/bin/plinth[484]: # storage usage-info
Oct 09 08:45:37 freedombox sudo[17195]: plinth : PWD=/ ; USER=root ; COMMAND=/usr/share/plinth/actions/storage usage-info
Oct 09 08:45:37 freedombox sudo[17195]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=113)
Oct 09 08:45:38 freedombox sudo[17195]: pam_unix(sudo:session): session closed for user root
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Caught signal SIGTERM.
Oct 09 09:21:53 freedombox systemd[1]: Stopping FreedomBox Service (Plinth)...
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Bus STOPPING
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('127.0.0.1', 8000)) shut down
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: Exiting glib main loop
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Stopped thread '_TimeoutMonitor'.
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: Glib main loop thread exited.
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Bus STOPPED
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Bus EXITING
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Bus EXITED
Oct 09 09:21:53 freedombox /usr/bin/plinth[484]: [09/Oct/2021:09:21:53] ENGINE Waiting for child threads to terminate...
Oct 09 09:21:54 freedombox systemd[1]: plinth.service: Succeeded.
Oct 09 09:21:54 freedombox systemd[1]: Stopped FreedomBox Service (Plinth).
Oct 09 09:21:54 freedombox systemd[1]: plinth.service: Consumed 7min 4.215s CPU time.
This log shows that systemd explicitly stopped Plinth service (at 09:21:53) after it has been running for a while. I don’t know of a reason why it would do that. What happens if you run:
systemctl start plinth.service
Collect the journal again if it does not work.
When I run systemctl start plinth.service it immediately responds with
Failed to start plinth.service: Unit plinth.service is masked.
journalctl -u plinth doesn’t have any new entries.
Strange. Run this:
systemctl unmask plinth.service
systemctl enable plinth.service
systemctl start plinth.service
Here’s what I get:
# systemctl unmask plinth.service
Removed /etc/systemd/system/plinth.service.
# systemctl enable plinth.service
Failed to enable unit: Unit file plinth.service does not exist.
# systemctl start plinth.service
Failed to start plinth.service: Unit plinth.service not found.
That explains what happened. ‘freedombox’ package was removed during the upgrade process.
apt install freedombox
Indeed this brings Plinth back to life, It feels like I’m back in familiar territory.
I installed Wireguard and it is running so my original problem is now solved.
Sunil, thanks so much for your patience and assistance.
Same happened with me. What can be the reason behind losing freedombox during the upgrade? How can be prevented in future?