# Another Satisfied Customer

**URL:** <https://discuss.freedombox.org/t/another-satisfied-customer/889>\
**Category:** Feedback\
**Created:** [May 8, 2020, 7:11am UTC](https://discuss.freedombox.org/t/another-satisfied-customer/889 "2020-05-08T07:11:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![joseph](https://discuss.freedombox.org/letter_avatar_proxy/v4/letter/j/dc4da7/32.png) [@joseph](https://discuss.freedombox.org/u/joseph)\
**Post date:** [May 8, 2020, 7:11am UTC](https://discuss.freedombox.org/t/another-satisfied-customer/889/1 "2020-05-08T07:11:35Z")

</div>

# Overall Impressions

I did not consider is the importance of external connectivity - I had all but given up on this over the years. You’ve brought back the people’s internet of old! I chose Freedombox to replace the network services offered by my ISP’s gateway/modem/router/ap combo device. This is working splendidly, but I see that Freedombox is so much bigger. Well done!

**List of things you liked**

- The feeling of DDNS and Let’s Encrypt setup was profound and completely unexpected!
- Searx immediately pierced the search-engine preferences bubble. Searching the internet works again.
- When the details are accounted for, setup can be fast and high quality
- I’ve learned about modern encryption infrastructure

**List of things you disliked**

- Communication of removing /etc/network/interfaces entry after Debian installation could be improved or this step could be automated.
- The Configure page could better explain that Domain Name should be the FQDN rather than the DNS Domain Name of the Freedombox host.
- BIND setup could warn you to stop when you have a Shared interface. This incompatibility isn’t controlled effectively - but is documented if you read the manual first.
- CUPS could not use AES 128 GCM certificates from Let’s Encrypt. I believe that the Debian OpenSSL distribution does not include this capability.
- I have not got internal network name resolution worked out yet. It’s probably in here somewhere.

---

<div class="post-metadata">

**Author:** ![ichibrosan](https://discuss.freedombox.org/user_avatar/discuss.freedombox.org/ichibrosan/32/406_2.png) [@ichibrosan](https://discuss.freedombox.org/u/ichibrosan)\
**Post date:** [June 23, 2020, 10:11am UTC](https://discuss.freedombox.org/t/another-satisfied-customer/889/2 "2020-06-23T10:11:04Z")

</div>

I am quite pleasantly surprised at the richness of the FreedomBox environment. The web interface is quite easy to use. I have gotten used to doing everything the hard way in vi. This is a nice break from that. I am running on a pine64so baseboard/module.
